In 1991, B & W patented their innovative gooseneck hitch that solved an issue many were having; how to remove the ball out of the bed when not towing. The B & W answer is to cut a 4 inch hole in the bed which accommodates the Turnover hitch ball, while the mounting system is bolted to the frame beneath the bed. This design is completed with a handle attached toa 5/8” locking pin that goes through the ball. When you do not need to use the hitch, the handle allows you to retract the pin and stow the ball upside-down, in the same receiver used while in action. This design was a great improvement to the welded-in ball and fold down plate solution.
B & W hitches are manufactured using high quality steel with a powder coated finish to ensure maximum durability. The gooseneck hitches are also designed specifically for your Dodge Ram Truck, ensuring ease of installation and a perfect fit. We do this so that you will make the least amount of modifications to your vehicles frame as possible, which could void your manufacturer’s warranty in many other installations.
The Turnoverball has been professionally tested and is rated to 30,000 lbs Gross Trailer Weight (GTW) and 7,500 lbs Vertical Tongue Weight (VTW). Customers have been hauling their precious cargo with the Turnover Ball for over fifteen years, and it has an impeccable safety record. It's easy to see why; B & W is committed to quality! Turnover ball hitches by B & W are manufactured in Kansas, right here in the good old U.S.A. They stand by their product, and even offer a limited lifetime warranty.
DOES NOT FIT Mega-Cab NOR 2010-2012 3/4 & 1 Ton Short or Long Bed Gas Engine Trucks
- 30,000 lb GTW / 7,500 lb VTW
- #1 Hitch in America
- Convert from a hitch to a level bed in seconds
- Meets all OEM fastening requirements
- Precise fit and installation for all full-sized trucks
- Bolts to existing holes in the frame with no drilling or welding
- Installs under the bed with no bed removal
- Requires only a 4" hole in the bed
- Gives you the rugged versatility you want
- Seven towing accessories to accommodate all your needs
- Powder coated for a durable and long lasting finish
- Limited Lifetime Warranty
- All components manufactured in the U.S.A.
Turnover Ball Hitch Instructions
B & W 1313 Turnover Ball Gooseneck Hitch FAQ with SD Truck Springs
- Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
- Model: Dodge 3/4 & 1 Ton Long & Short Bed Ram 2500, 3500
Q: Do I need to provide maintenance to my turnover ball hitch at all?
A: Depending on the overall usage of the hitch on your Dodge Ram, coats of grease may need to be re-applied in order to maintain performance. Periodically greasing up the corners of your B&W 1313 Turnover Ball Hitch is in great practice and will help eliminate possible issues in the future such as rusting.
4.7 / 5This item is rated 4.7 out of 5 based on 3 customer reviews.
by ROY H
Hitch has done what it's supposed to do. Installation was pretty simple but there were some bolts that were hard to reach with a torque wrench. I am pleased with the towing results and overall operation and quality of the kit.
by Keith W
It fits perfect. Took about 2 hours to install. It is easy to install and looks great. I recommend this product
by Richard M
It is a great product. I have one on each of my two Dodge Ram 3500 dually's. I installed the one on the newest truck and everything fit as it was supposed to. I'm not a mechanic so I'm sure that it would have been easier to got to some of the bolts to tighten if I had all of the right tools. I pull a six horse trailer and a 41' toy hauler and there has neve been a problem in nine years. I would recommend to anyone looking to have a gooseneck hitch and still keep the full use of the bed.