In 1991, B & W patented their innovative gooseneck hitch that solved an issue many were having; how to remove the ball out of the bed when not towing. The B & W answer is to cut a 4 inch hole in the bed which accommodates the Turnover hitch ball, while the mounting system is bolted to the frame beneath the bed. This design is completed with a handle attached toa 5/8” locking pin that goes through the ball. When you do not need to use the hitch, the handle allows you to retract the pin and stow the ball upside-down, in the same receiver used while in action. This design was a great improvement to the welded-in ball and fold down plate solution.
B & W hitches are manufactured using high quality steel with a powder coated finish to ensure maximum durability. The gooseneck hitches are also designed specifically for your Chevy & GMC 3/4 Ton Heavy Duty Short & Long Bed Trucks, ensuring ease of installation and a perfect fit. We do this so that you will make the least amount of modifications to your vehicles frame as possible, which could void your manufacturer’s warranty in many other installations.
The Turnoverball has been professionally tested and is rated to 30,000 lbs Gross Trailer Weight (GTW) and 7,500 lbs Vertical Tongue Weight (VTW). Customers have been hauling their precious cargo with the Turnover Ball for over fifteen years, and it has an impeccable safety record. It's easy to see why; B & W is committed to quality! Turnover ball hitches by B & W are manufactured in Kansas, right here in the good old U.S.A. They stand by their product, and even offer a limited lifetime warranty.
B&W 1067R Turnover Ball Hitch Instructions
Q: Does this Hitch require maintenance? A: Greasing up the corners of the hitch from time to time is optimal for performance and quality. You will be asked do it at the end of the installation process and you should keep an eye on the hitch and grease it whenever necessary in order to preserve the quality of the hitch.
Install was less than two hours by myself. directions are very detailed and everything went together just fine. Put 15,000lb on it the very next day and no problems.
A very good hitch and not that hard to install by yourself. I have had excellent service from it and I am very satisfied .Thank you.
my husband install the hitch with no problems at all. I have referred several people to your site as well as the B&W Hitch.
Great hitch, second one i have owned. Easy install, easy to use.
This is my second B&W Turnover Ball Gooseneck Hitch. I am very pleased with both hitches. I think they are the best on hitches on the market.
I was very pleased to that the installation is indeed a bolt in deal. Very nervous abut cutting that big hole but after measuring 6 times I went for it and was dead on. Love the turnover ball. Might not grease the pocket cause gets in and makes sticky. Just remove once in a while to clean should be adequate. I would recommend this
Best hitch I have ever had. I like how easy it is to take in an out of the truck and how it pivots with my fifth wheel side to side and up and down It really works nice.
This is the best hitch I have ever had I have a 40' fifth wheel 15,000 lbs. and this hitch works great and it is so easy to take in and out of the truck bed I would recommend this hitch to everyone!!
Purchased this for my 2002 Chevy 2500HD short bed w/4" lift. Fits and works perfectly. *Note: Ordered on a Thursday, arrived the next day... Awesome! Thank you sdtrucksprings.com.
