Description
In 1991, B & W patented their innovative gooseneck hitch that solved an issue many were having; how to remove the ball out of the bed when not towing. The B & W answer is to cut a 4 inch hole in the bed which accommodates the Turnover hitch ball, while the mounting system is bolted to the frame beneath the bed. This design is completed with a handle attached toa 5/8” locking pin that goes through the ball. When you do not need to use the hitch, the handle allows you to retract the pin and stow the ball upside-down, in the same receiver used while in action. This design was a great improvement to the welded-in ball and fold down plate solution.
B & W hitches are manufactured using high quality steel with a powder coated finish to ensure maximum durability. The gooseneck hitches are also designed specifically for your Dodge Ram Truck, ensuring ease of installation and a perfect fit. We do this so that you will make the least amount of modifications to your vehicles frame as possible, which could void your manufacturer’s warranty in many other installations.
The Turnoverball has been professionally tested and is rated to 30,000 lbs Gross Trailer Weight (GTW) and 7,500 lbs Vertical Tongue Weight (VTW). Customers have been hauling their precious cargo with the Turnover Ball for over fifteen years, and it has an impeccable safety record. It's easy to see why; B & W is committed to quality! Turnover ball hitches by B & W are manufactured in Kansas, right here in the good old U.S.A. They stand by their product, and even offer a limited lifetime warranty.
Notes
DOES NOT FIT Mega-Cab NOR 2010-2012 3/4 & 1 Ton Short or Long Bed Gas Engine Trucks
Specs
- 30,000 lb GTW / 7,500 lb VTW
- #1 Hitch in America
- Convert from a hitch to a level bed in seconds
- Meets all OEM fastening requirements
- Precise fit and installation for all full-sized trucks
- Bolts to existing holes in the frame with no drilling or welding
- Installs under the bed with no bed removal
- Requires only a 4" hole in the bed
- Gives you the rugged versatility you want
- Seven towing accessories to accommodate all your needs
- Powder coated for a durable and long lasting finish
- Limited Lifetime Warranty
- All components manufactured in the U.S.A.
Product Video
Instructions
Turnover Ball Hitch Instructions
Vehicle Applications
- Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
- Model: Dodge 3/4 & 1 Ton Long & Short Bed Ram 2500, 3500
B & W 1313 Turnover Ball Gooseneck Hitch FAQ with SD Truck Springs
Q: Do I need to provide maintenance to my turnover ball hitch at all?
A: Depending on the overall usage of the hitch on your Dodge Ram, coats of grease may need to be re-applied in order to maintain performance. Periodically greasing up the corners of your B&W 1313 Turnover Ball Hitch is in great practice and will help eliminate possible issues in the future such as rusting.
Customer Reviews
4.7 / 5This item is rated 4.7 out of 5 based on 16 customer reviews.
by
Keith H
Worked out great, installed it myself because i got all the clear instruction in manual . it Requires only a 4" hole in the bed which is one of the best feature of this kit . sd truck always sell the quality kits I must say .
by
forrest y
My hitch worked great for about 4,000 miles of towing. After that the release pin became stuck and if I want to remove the ball I have to climb under the truck and hammer the pin out of the ball. Yet the pin has no problem releasing to latch the ball in place. That being said it's had about 15,000 miles of active service with me and it's so easy to install that I've used the same hitch in two trucks now. It seems to be a well-built product.
-Forrest
by
Wade T
Very easy and clean installation. Hitch works perfectly. I used this in combination with the extend-a-goose receiver on my swb truck with no turning issues and the ride was very smooth.
by
Peter K
Product came very quick but also very frustrated only half of the hitch came I didn't come with the plates or arms to mount it to the frame it's just the center section and the ball was not informed it didn't come with the rest I also can't seem to find the rest so quite frustrated
by
Dale M
The B&W turnover ball was very easy to install. And doesn't interfear when hauling thing in pickup
by
DANIEL H
I have bought B&W Turnover Ball Gooseneck Hitch and my experience is very good , it is easy to install. thanks
by
Joe C
Another great product it was easy to install. Im a camper transporter so use this on a regular basis if u r going to buy one than this is it. And if u buy this buy the B&W companion fifth wheel. I have the short box dodge room is the only problem with this unit but if u haul any camper its built tough it can handle any trailer
by
DANIEL H
easy to install. thank you guys so much. Great product
by
Rod T
This hitch is very well built and the installation in my Dodge 3500 is very solid. The instructions were easy to follow; however, I found some useful installation tips from YouTube that made it a little easier for one person to do the install. I like the fact that this hitch is American made by a company who will stand by their work.
by
Ashley H
Loving the product itself. Very easy to install.I would make one correction to the instructions to install it, but even those are easy to follow and understand.
by
John S
Easy installation. Everything included excluding the muscle required to lift into place. Well made hitch!
by
Rick P
Very easy to install, good quality, very well built. Working well, enjoy having a smooth bed when i'm not towing
by
Joseph P
Best made hitch out there. Installation was simple about a two hour install. Pulls my gooseneck and tractor with ease and no jerking as I've had with other brands. This is the hitch I would recommend to anyone wanting to haul.
by
ROY H
Hitch has done what it's supposed to do. Installation was pretty simple but there were some bolts that were hard to reach with a torque wrench. I am pleased with the towing results and overall operation and quality of the kit.
by
Keith W
It fits perfect. Took about 2 hours to install. It is easy to install and looks great. I recommend this product
by
Richard M
It is a great product. I have one on each of my two Dodge Ram 3500 dually's. I installed the one on the newest truck and everything fit as it was supposed to. I'm not a mechanic so I'm sure that it would have been easier to got to some of the bolts to tighten if I had all of the right tools. I pull a six horse trailer and a 41' toy hauler and there has neve been a problem in nine years. I would recommend to anyone looking to have a gooseneck hitch and still keep the full use of the bed.
Displaying 1 to 16 (of 16 reviews)