2011-2013 Ram 2500 / 2011-2012 3500 Pickup 4wd (Diesel Engine) - 5" Suspension Kit

Front: lifted coil springs, control arm drop brackets, track bar brackets, sway-bar drop brackets, pitman arm and hardware.
Rear: 4" fabricated lift block, u-bolts and hardware
Shocks: 4 Performance N3 series shocks.

• Increased ground clearance
• Easy bolt-on installation
• Works with factory 17" / 20" wheels
• Control arm drop brackets reduce control arm angle, improving ride quality and driveability
• Maintains factory ride quality
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks
• Levels front of the dodge pickup with rear

Click here to view Installation Instructions

• Installation Time: 4-6 Hours
• Wheel Backspacing: Factory
• Recommended Tire Size: 37 x 12.50

• Does NOT fit 2013 Ram 3500 models - if you drive a 2013-2014 3500 please refer to kit number 369.20
• Does NOT fit dually models
• Does NOT fit Power Wagon models
• Requires minor drilling.
• On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing.

• Year(s): 2011, 2012, 2013
• Model(s): Ram 2500 Pickup/Mega Cab


• Year(s): 2011, 2012
• Model(s): Ram 3500 Pickup/Mega Cab