USA Staff Available - 1 (877) 774-6473
HELP DESK |  Login |  View Cart  View Cart
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Truck Springs Logo - Suspension Specialists Since 1971 SDTruckSprings Logo and Header
 
WE WILL BEAT ANY PRICE ON LIFT KITS!*
+ FREE SHIPPING!

5" Suspension Lift Kit [w/steering knuckles] - 1999-2003 Toyota Tundra 2wd 4wd

Tuff Country

Model: 55905
by Tuff Country
5 stars 4.5/5Read Reviews


Free Shipping

Retail Price: $2315.95
Your Price: $1,780.83
+ 10% OFF SALE

Sale Price: $1,602.75


Add to Cart:

Options












Description

The Tuff Country Toyota Tundra 5” lift kit is easy to install and gives an additional tire clearance to fit 33” tires. This kit uses new replacement heavy duty spindles which eliminate the need for ball joint spacers. Upper ball joints and bearings are pressed into the new spindles. To lift the front end of your vehicle while maintain factory ride, upper coil/strut spacers are used. Please note, replacement struts are not required. While stabilizing the front end of your vehicle, a lower subframe drops the lower control arms with a one piece design. After the kit is installed, 33” x 12.5” tires can be mounted.

Features
  • Heavy duty replacement spindles
  • Upper coil / strut spacers maintain a near factory ride
  • Front stock struts can be retained
  • One-piece subframe for added strength
  • Allows use of 33" tires
  • Upper ball joints &bearings pressed into new spindles
Installation Notes
  • Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Please choose shocks & boots in the "Options" fields above if you have not already purchased extended shocks. Front struts can be retained
  • Rims with 4.5" backspacing or less are required for installation
  • This kit is designed to fit with ABS brakes and automatic hubs. Vehicles without ABS brakes require optional ABS plugs.
Specs
Instructions Instructions
Recommended Tire Size 33" x 12.5"
Amount of Lift 5" Front / 3" Rear
Bill of Materials

1) One piece subframe, 2) Upper strut spacers, 2) Heavy duty steering knuckles, 2) Differential drop brackets, 2) Sway bar drop brackets, 1) Steering shaft extension, 2) Cast iron 3" rear lift blocks, 4) Rear ubolts, 1) Hardware bag

CA Residents: Prop 65 Warning
Customer Reviews
5 stars 4.5 / 5This item is rated 4.5 out of 5 based on 2 customer reviews.
4 of 5 Stars

by Brandon B

Overall I liked the kit. I did go on and welded up the joints better than they where and repowder coated. After was finished I couldn't get the popping out of the front so I pulled it back in and welded the lift to the frame. Now it rides so smooth and quite. I love my truck now. Also i did put a body lift on with strut lift and received total of 11" front 10" rear. Can you guys send me a windsheild sticker plz. Thank you for everything and have a good day.

5 of 5 Stars

by Brandon B

I put the lift on and overall it is a nice lift. I went back and touched some the welds up. I'm a fabricator. Everything went togather well,but I did go on and weld the lift solid to the truck. No matter how tight I got all the bolts it still would pop under the front end. Also i couldn't keep the alignment right on it till after i welded it solid. Now it is perfect and have no complaints. I did add a 3" body lift with 2" lift coil over struts for a total of 10" in my 2000 Toyota Tundra.wish I could leave pictures

Displaying 1 to 2 (of 2 reviews)

 

Write Review

Call Us - 1 (877) 774-6473
Mon-Thur: 8AM - 11PM | Fri: 8AM - 10PM | Sat: 9AM - 6PM

Live Help Available at Times Listed Above
accepted credit cards
         



SDTruckSprings
85-7 Air Park Dr | Ronkonkoma, NY 11779
Items shipped from multiple U.S. warehouses.

Copyright ©2020 SDTruckSprings.com. All Rights Reserved