Call for Up to 20% OFF - 1 (877) 774-6473
HELP DESK |  Login |  View Cart  View Cart
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Truck Springs Logo - Suspension Specialists Since 1971 SDTruckSprings Logo and Header

4" Long Arm Lift Kit - Jeep LJ Wrangler Unlimited Automatic Trans. (2004-2006)

Pro Comp

Model: K3095B
by Pro Comp
Free Shipping

Retail Price: $3966.95
Your Price: $3,050.99

Add to Cart:


Alignment Camber/Caster Kit

Adjustable Track Bar

Steering Components

Brakeline Options

4 Link Rear Conversion

Steering Box Protector

Sway Bar Disconnects

  • K3095B - Kit W/ ES Shocks
  • K3095BP - Kit W/ Pro Runner Shocks
  • K3095BMX - Kit W/ MX6 Shocks

Pro Comp has been the leader in Lifted Truck/SUV suspension systems since 1992. Get a complete kit ranging from a Mild 2" lift to a Sky Scraping 8.5" lift! Pro Comp has a kit that will fit your needs perfectly. You can personally customize the ride and look of your truck or SUV with many custom accessories including Lateral Trac Bars, Multiple Shock Kits, Stainless Skid Plates, and Pro Runner Light Bars. All components are hammer tone gray powder coated, zinc plated, or epoxy dripped for long lasting protection from the elements. Each kit comes complete with all hardware necessary and detailed, easy to understand instructions.

  • Front & Rear Lift Amount: 4" Front & 4" Rear
  • Max Tire Size: 35" x 12.50"
  • Wheel Diameter: 15"+
  • Wheel Width: 8" - 10"
  • Wheel Backspace: 3.25" - 4.5"
  • Wheel Bolt Pattern: 5 X 4.5"
  • Wheel Bolt Code: 65
  • Lug Nut Size: 1/2"
  • Lug Nut Kit: PXA21183
  • Shocks: Included
  • Shock Type: ES Series
Consists Of
  • Front Coil Springs
  • Rear Coil Springs
  • Lower Long Control Arms
  • Adjustable Upper Control Arms
  • Adjustable Front Track Bar
  • Front Track Bar Brackets
  • Drop Pitman Arm
  • 4 Link Rear Conversion
  • Front Sway Bar Disconnects
  • Rear Sway Bar Links
  • Related Brackets
  • Removable Center Belly Pan
  1. Use of a 35” x 12.50” tires will require wider replacement fender flares or steel fenders.
  2. Driveline modifications may be required for height increases over 1.5” due to increased driveline angles.
    Transfer case SYE (Slip Yoke Eliminator) kit and CV rear drive shaft required for Long Arm Applications.
    Rubicon models will require CV drive shaft w flange adapter (not available from Pro Comp).
  3. Vehicles with Auto Trans will require removal of front skid plate when using transfer case lowering hardware.
  4. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
  5. Coil spacer 55496 can be used to increase front ride height by .75”.
  6. Replacement Lower Control Arm Bushing kit 90-6048B.
  7. Vehicle will require alignment after kit is installed.
  8. Cambolt kit 20-65226 is recommended for caster angle adjustments. In most cases, reducing positive caster to the minimum factory specification will reduce or eliminate the potential for steering wheel instability.
  9. Rear cambolt kit 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.
  10. Installation of JTB403 track bar requires track bar drop bracket 55300 and drop pitman arm YJ400
Vehicle Applications
  • Years: 2004, 2005, 2006
  • Model: LJ Wrangler Unlimited 4WD Automatic Trans.
CA Residents: Prop 65 Warning
Customer Reviews There are no customer reviews at this time.

Write Review

Call Us - 1 (877) 774-6473
Mon-Thur: 8AM - 11PM | Fri: 8AM - 10PM | Sat: 9AM - 6PM

Live Help Available at Times Listed Above
accepted credit cards

85-7 Air Park Dr | Ronkonkoma, NY 11779
Items shipped from multiple U.S. warehouses.

Copyright ©2020 All Rights Reserved