Description
The Tuff Country suspension lift kit uses front replacement torsion bar keys and rear lift blocks will lift your vehicle 2”. The torsion bar keys reindex the factory 2500HD torsion bars and lifts your vehicle without cranking up the factory torsion bars.
Features
-
Simple bolt-on installation
-
Add 2 Inches of Height to Front and 1" to Rear
-
No need to "crank up" torsion bars
-
Allows for more tire clearance
Installation Notes
-
Factory shocks can be used with this suspension lift kit, however new replacement shocks are strongly recommended. See options above.
-
Torsion bar keys are designed to install with a stock suspension only. Do not use with other types of lift kits. Will void warranty.
-
Note: All Chevy/GMC factory torsion bar keys are marked with a color code in paint on the key. If your vehicles markings are purple, please make sure to select that in the option field above.
Specs
Instructions |
Instructions |
Amount of Lift |
2" Front / 1" Rear |
Install Time: |
4-6 Hours |
Bill of Materials
2) Front Torsion Bar Keys, 2) Rear Cast Iron 1" Lift Blocks, 4) Extended Rear U-bolts, 2) Front shocks relocation brackets, 2) Hardware bags
Description
The Tuff Country GM 2500 2” suspension lift kit offers an additional tire clearance to fit 32” tires. The kit includes Upper coil spring/strut spacers that lift the front of your vehicle and maintains the factory ride, cast iron blocks which lifts the rear of your vehicle. Note: You do not need to replace your existing factory struts. Tuff Country has been producing quality suspension products for over 20 years and backs all lift kits with a limited lifetime warranty.
Features
-
Upper coil / strut spacers maintain a near factory ride
-
Front stock struts can be retained
-
Rear cast iron blocks
-
Allows use of 32" tires
-
Rear stainless steel brake hose included
Installation Notes
-
Factory front & rear shocks must be replaced with new extended shocks to install this lift kit properly. Please choose shocks & boots above if you have not already purchased extended shocks.
Specs
Instructions |
Instructions |
Recommended Tire Size |
32" x 10.5" |
Amount of Lift |
3" Front / 3" Rear |
Bill of Materials
2), Front strut spacers, 2) Front strut pre-load spacers, 6) Strut studs, 1) Rear brake line & bracket, 2) 3" cast iron rear lift blocks, 4) Rear ubolts, 2) Differential drop sleeves, 1) Hardware bag
Notes
Alternate Part #: 12934KN, 12964, 12964KN